Vinyl Floor Stripping Coffs Harbour — Commercial Strip, Seal & Buff

A standard area up to 40m² typically takes between 3 to 5 hours for the complete stripping, neutralising rinse, and multi-coat application process. Larger commercial floorplates, medical suites, or school facilities are staged in sections or scheduled overnight. Each coat of polymer seal requires 30 to 45 minutes of dry time before the next layer can be laid.

You can walk on the surface in clean socks or soft shoe covers roughly 1 to 2 hours after the final coat dries to the touch. However, commercial foot traffic should ideally stay off the floor for 8 to 12 hours. Full chemical curing takes 24 to 48 hours, so avoid wet mopping or dragging heavy stock across the surface during this curing window.

We apply commercial-grade cross-linked polymer seals formulated specifically to meet Australian slip-resistance standards for commercial workplaces (AS 4586). The microscopic texture provides firm foot grip under dry footwear while presenting a brilliant high-gloss or satin shine that resists black heel scuffs and soil embedment.

Yes. Dedicated after-hours and weekend availability by arrangement is a cornerstone of our commercial service. We routinely start once your doors close in the evening, strip the old wax, lay all necessary coats, and burnish the floor so your staff and visitors arrive to a dry, fully functional, and gleaming surface the following morning.

To preserve your investment, sweep daily to remove gritty dust and damp mop using a pH-neutral commercial floor cleaner. Never use harsh ammoniated degreasers, bleach, or acidic citrus solutions, as they strip the protective wear layers. High-speed buffing every 4 to 8 weeks will maintain the gloss and extend the lifespan of the seal.